Custom Kitchen Cabinets for Greenpoint & Williamsburg
Custom kitchen cabinets for Greenpoint and Williamsburg, Brooklyn — loft conversions, townhouses, and condos. By appointment. (718) 804-5488.
Planning a kitchen here? See our Williamsburg custom kitchen cabinets page for projects, building notes and a quote.
Greenpoint kitchens sit where the industrial waterfront meets townhouse blocks. A loft on West Street still carries steel columns and a ceiling that never lands square. A Franklin Street townhouse parlor kitchen leans like every other 19th-century plaster wall in North Brooklyn. A newer condo near McGuinness has a bulkhead, a reserved freight cab, and developer boxes that leave a dead bay under the soffit. A stock pack that looked fine in a catalog leaves fillers, a crooked fridge line, and an island that fights the chimney breast.
Green Cabinets NY designs and installs custom kitchen cabinets for Greenpoint lofts, townhouses, and condos by appointment. We are home-based in Bushwick — not a walk-in shop. Measure and sample visits happen in your kitchen. Start with the Brooklyn kitchen cabinets map. This article covers Greenpoint and, further down, Williamsburg next door: loft conversions, townhouse parlor kitchens, condo freight, and how we spec the boxes. Nearby: Williamsburg lofts and condos and Fort Greene brownstones.
Lofts, townhouses, and McGuinness-side condos
Waterfront and industrial loft conversions (West, Quay, Commercial, and the old factory blocks). Converted warehouses often keep brick, exposed steel, and 10–14 foot ceilings. The kitchen may sit in an open loft plate with no true wet wall where a catalog island wants to live. We measure column spacing, beam drops, and clear height after any mezzanine or sprinkler line, then draw double-stacked uppers or a tall pantry tower that respects the architecture. Door language often leans slim shaker or slab; finishes follow the wood species guide and painted vs wood veneer in NYC humidity.
Townhouses and brownstone-adjacent blocks (Franklin, Manhattan Ave side streets, and the residential core). Parlor kitchens run long toward the rear. Walls and floors sit out of square. Chimney breasts and radiator niches eat fixed modules. Classic shaker with careful scribe to original base and cornice is a common ask — same discipline as Park Slope and Fort Greene, different street parking and stair habits. We do not pretend new cabinets are 1880 originals; we make them read with the house.
Newer condos and mixed-use near McGuinness and the waterfront towers. Cleaner slabs, shallower galleys, HVAC returns in the ceiling, and freight elevators that need a reservation and a Certificate of Insurance. Developer-grade boxes often leave unused height under the bulkhead. Custom millwork reclaim that bay with taller wall cabinets, integrated appliance panels, and pantry pull-outs sized to the real opening. Soft-close notes: Blum vs Hettich. Drawer banks and dovetail drawer boxes often beat deep shelves you never see.
Zip context we cover: 11222 — Greenpoint proper, the waterfront loft blocks, and the residential streets toward McCarren — by appointment only. Williamsburg next door shares many loft habits; we measure each kitchen separately.
Also covering Williamsburg
Williamsburg kitchens are not one layout. A cast-iron loft on Wythe has steel columns and a ceiling that never lands square. A new condo near the waterfront has freight rules and a bulkhead that steals the top cabinet bay. A Southside townhouse parlor kitchen leans like every other 19th-century plaster wall in Brooklyn. A stock pack that looked fine in a catalog leaves fillers, a crooked island, and a fridge that never sits flush.
Northside lofts (Wythe, Kent, Berry, and the old industrial blocks). Converted warehouses often keep brick, exposed steel, and 10–14 foot ceilings. The kitchen may sit in an open loft plate with no true wet wall where a catalog island wants to live. We measure column spacing, beam drops, and clear height after any mezzanine or sprinkler line, then draw double-stacked uppers or a tall pantry tower that respects the architecture. Door language often leans slim shaker or slab; finishes follow the wood species guide and painted vs wood veneer in NYC humidity.
Southside townhouses and brownstone-adjacent blocks. Parlor kitchens run long toward the rear. Walls and floors sit out of square. Chimney breasts and radiator niches eat fixed modules. Classic shaker with careful scribe to original base and cornice is a common ask — same discipline as Park Slope, different freight habits. We do not pretend new cabinets are 1880 originals; we make them read with the house.
East Williamsburg and newer condo towers. Cleaner slabs, shallower galleys, HVAC returns in the ceiling, and freight elevators that need a reservation and a Certificate of Insurance. Developer-grade boxes often leave unused height under the bulkhead. Custom millwork reclaim that bay with taller wall cabinets, integrated appliance panels, and pantry pull-outs sized to the real opening.
Zip context we cover: 11211, 11206, and 11249 — Northside, Southside, East Williamsburg, and the waterfront — by appointment only.
Why stock cabinets fail in Greenpoint
- Cast-iron loft ceilings and steel columns that refuse a standard 36-inch module
- Out-of-square plaster in townhouses and older walk-ups
- Condo bulkheads, sprinkler heads, and returns that cut upper height
- Sink stacks and gas lines that pin the wet wall where a catalog wants an island
- Freight cabs and stair-only buildings that will not take oversized stock panels — see freight elevator delivery
Custom millwork starts from the clear opening. We scribe fillers on site so the run looks built into the loft or plaster, not parked against it.
Boards, COI, and occupied-unit installs
Greenpoint mixes loft co-ops, condo towers, and fee-simple townhouses. Boards and managing agents typically ask for COI, work-hour windows, hallway protection, and a freight reservation when the building has one. Rules vary. This is not legal advice. You own board submissions; we support with drawings and COI when asked — same culture in condo board kitchen renovation rules and occupied-unit install logistics. Delivery follows kitchen installation in NYC. Stair-only loft buildings get panel sizes planned for the stair and landing before the truck leaves Bushwick.
How a Greenpoint kitchen project usually runs
- By-appointment measure in your loft, townhouse, or condo — samples come to you; there is no showroom floor at 10 Montieth.
- Design drawings with exact widths, heights, appliance openings, column and bulkhead notes, and scribe details.
- Building package support — COI and drawings when the board or managing agent asks.
- Fabrication — roughly 4–6 weeks from signed design for cabinetry, depending on finish and hardware.
- Scheduled install inside approved work hours, with freight or stair path planned before delivery.
Related scopes and finished photography
Related scopes often include pantry millwork, laundry or mudroom cabinets, a window seat or banquette, and a vanity in the online designer. Designer renders are layout previews, not finished photography. Finished kitchens appear on case studies when clients permit.
Pricing language without fake testimonials
Greenpoint kitchen cabinetry pricing tracks size, finish, hardware, and building logistics — a short condo galley costs less than a full loft run with tall pantry towers and an island. Delivery inside Brooklyn / Manhattan / Queens is included in our millwork quote. Building freight fees sit outside that line when the board imposes them. We do not invent reviews, awards, or star ratings. Site history since 2009 / 15+ years is accurate. More: About and the blog.
FAQ
Do you work in Greenpoint lofts with exposed brick and steel columns?
Yes. We measure column spacing, beam drops, and clear height, then draw cabinets that fit the loft plate instead of fighting it.
Can you upgrade developer-grade cabinets in a Greenpoint condo?
Often. We reclaim height under bulkheads, integrate appliance panels, and build pantry pull-outs sized to the real opening — subject to board rules and COI.
Do Greenpoint co-ops and condos require paperwork for kitchen cabinets?
Many do — COI, work hours, freight reservation. Ask your managing agent early. We bring COI and drawings when asked; you own the board package. See our COI guide.
Greenpoint loft and Williamsburg loft — same process?
Same shop, different measures. Both need column and ceiling notes; street access and freight habits differ by building. We measure each kitchen separately.
Are designer-tool images finished Greenpoint kitchens?
No. They are layout previews. Real installs are photographed after the job when the client allows.
Get a quote
Ready to plan custom kitchen cabinets for your Greenpoint loft, townhouse, or condo? Email orders@greencabinetsny.com or call (718) 804-5488. Include your block or cross-streets (waterfront loft / Franklin-side townhouse / McGuinness condo), loft vs townhouse vs condo, photos of the kitchen walls and ceiling, and any board or freight rules you already know. Browse Brooklyn kitchens, try a vanity layout in the designer if bath millwork is in the same scope, or read more about us and the blog. We reply with next steps for a by-appointment measure.